Stainless Steel
201 Stainless Steel Hydraulic Soft Close Cabinet Hinge
Corrosion resistant, two-way clip-on arm designed for wet kitchen, bath and office environments.
SGS Onsite Verified Facility
Audited 15,000 m² workshop, 229 verified staff
#2 Best Seller in Furniture Hardware
Over 330,000+ units delivered per batch cycle
Full In-House Testing Lab
Durability, salt-spray, torque & fatigue validation
Flexible OEM/ODM Capabilities
24 dedicated structural & mould engineers
Export Product Selection
High-Precision Furniture Hardware
Engineered for global wholesalers, cabinet manufacturers, and project contractors. Manufactured under strict ISO guidelines and tested for compliance with EN 15570 and ANSI/BHMA standards.
Smart Security
Electronic Password & Biometric Mini Smart Drawer Lock
Robust zinc alloy casing with digital touch code keypad for corporate desks, gym lockers and hotel safes.
Kitchen Organizer
Pull-Out Multi-Tier Seasoning Rack & Utensil Pantry Basket
Heavy gauge chromed wire basket system with integrated soft-close damping slides for base cabinets.
Specialty Hinge
No-Drill Frog Type 90° Hydraulic Soft-Closing Hinge
Direct face-frame mounting without cup routing, perfect for compact wardrobe doors and lightweight cabinets.
3D Adjustment
Modern 3D Clip-On Hydraulic Soft Close Cabinet Door Hinge
Precise 6-way cam adjustment allows effortless alignment of heavy door panels in luxury interior millwork.
Corner Hinge
Minus 45° Angle Soft Close Concealed Cabinet Hinge
Specialized geometry engineered for angled corner units, triangular cabinetry and custom storage layouts.
Ultra-Slim Series
KH05 Space-Saving Square Flat Design 3D Soft Close Hinge
Ultra-low profile hinge arm optimizes internal cabinet clearance, preferred by high-end modern furniture brands.
Mini Series
26mm Cup Mini Concealed Hinge Full Overlay
Compact cup size designed specifically for narrow stiles, small cupboards, and lightweight glass frame doors.
Bi-Fold System
Parallel Opening Damped Bus Sliding Door Mechanism
Heavy duty synchronous opening motion for folding appliance garages, kitchen pantries and laundry cabinetry.
Architectural Black
Black Titanium 35mm Wingless Concealed Hydraulic Hinge
Wingless mounting base delivers a clean internal appearance with zero exposed mounting screw heads.
SUS 304 Grade
Premium Grade 304 Stainless Steel 3D Hydraulic Hinge
Zero-rust formulation engineered specifically for coastal villas, marine yachts and humid tropical installations.
Hardware Trim
Extruded Aluminum Architectural Edge Pull & Long Handle
Anodized finish with oxidation protection, available in custom lengths up to 2.8 meters for floor-to-ceiling closets.
Quality Assurance Rigor
In-House Testing Laboratory & Inspection Centers
To eliminate field failures, Guangzhou Britton Hardware Product Co., Ltd. operates a comprehensive internal laboratory that validates cycle life, load endurance, salt-spray corrosion resistance, and material hardness for every production batch.
Endurance Testing
Hinge Durability Cycling Machine
Automated pneumatic cycling rig executing 50,000 to 100,000 open/close cycles under simulated door loads to verify damper longevity.
Corrosion Analysis
Neutral Salt Spray (NSS) Chamber
Simulates coastal humidity and accelerated oxidation to test electroplated nickel, zinc and powder-coat finishes up to 96+ hours.
Drawer Slide QA
Guide Rail Fatigue Cycling Tester
Loads ball bearing and undermount slides up to 45kg-225kg dynamic capacity to ensure zero ball bearing drop or track deformation.
Tall Door Structural
High Door Hinge Fatigue Tester
Full-height wardrobe jig assessing torque distribution and sag resistance on heavy wood and aluminum-framed glass tall panels.
Mechanism Life
Push Open Fatigue Testing Machine
Calibrates rebound force, spring retention and tip-latch resilience across repeated continuous release cycles.
Pneumatics
Gas Strut & Flap Stay Fatigue Tester
Cycles cabinet gas cylinders through thousands of compression cycles to verify seal integrity and prevent nitrogen leakage.
Newton Force QA
Pneumatic Force (N) Profiler
Measures precise initial force, stroke progression and damping deceleration in Newtons to match door weight specs.
Tensile Strength
Thrust & Tension Testing Machine
Validates tensile breaking limits, rivet shear values, and hinge cup pull-out ratings for safety compliance.
Torque Tolerances
Screw Torque Calibration Rig
Measures adjustment and installation screw strip-out torque to eliminate cam screw failures during on-site installation.
Metallurgy
Rockwell & Vickers Hardness Tester
Monitors cold-rolled steel carbon grade, rivet case-hardening and heat-treatment uniformity across every raw sheet coil.
Impact Resistance
Falling Ball Impact Test Machine
Drops calibrated steel spheres from specified heights onto zinc die-cast parts, glass hinges and coatings to test fracture thresholds.
Metrology
Precision Digital Height & Coordinate Gauge
Micron-accurate coordinate verification for stamping dies, hinge leaf thickness, rivet clearances and tooling maintenance.
Manufacturing Excellence
From Raw Material to Export Container
Our two automated production facilities integrate precision stamping, CNC tooling, automated robotic riveting, and packaging lines to ensure consistent batch quality and on-time shipment.
Step 01
Raw Material Inspection
Spectral and gauge validation of prime cold-rolled steel coils, virgin POM polymers, and zinc alloys.
Step 02
Tooling & Mould Fabrication
In-house progressive dies manufactured to micron tolerances for proprietary customer OEM designs.
Step 03
Automated Stamping & Punching
Continuous progressive stamping presses shaping hinge cups, base plates, and multi-section runner rails.
Step 04
Automated Assembly Line
Robotic arms assemble internal hydraulic cylinders, damper springs, and links with high repeatability.
Step 05
In-Line Quality Control (IPQC)
Visual and mechanical checks at every station to discard burrs, plating defects, or loose rivets.
Step 06
Batch Functional Testing
Randomly selected finished products undergo full-cycle testing and closing speed checks prior to boxing.
Step 07
Custom OEM Packing & Palletizing
Private label color boxes, barcode polybags, reinforced export master cartons, and shrink-wrapped pallets.
Engineering Support
CAD/CAM R&D Design Team
24 senior engineers optimizing structural load, opening damping angles, and kinematic mechanisms.
Key Production & Tooling Machinery
High Precision Punching Press
Continuous-feed stamping presses guaranteeing dimensional uniformity of hinge components.
Automated Hinge Assembly Line
High-efficiency automated lines assembling arm rivets, damping pistons, and bases with sensor verification.
Center Rod Auto Riveting Machine
Precision hydraulic riveting stations ensuring consistent link play and vibration-free door movement.
Automated Gas Spring Charging Machine
Accurate computerized gas injection regulating internal cylinder pressure within ±2% Newton tolerance.
Precision Aluminum Cutting Machine
Double-mitre high speed cutting tools achieving zero-burr angled joints on glass frame profiles.
CNC Tooling Milling Machine
High-rigidity vertical machining center producing custom tooling blocks and hardened steel stamping dies.
Automatic Hardware Packing Machine
Automated optical sorting and polybagging for mounting screws, plastic wall plugs, and decorative covers.
Laser Logo & Batch Marking Station
High-resolution fiber laser marking buyer brand logos, model codes and manufacturing timestamps on hardware.
Procurement Reference
Engineering Compliance & Inspection Matrix
Key technical parameters to include in your RFQ. We provide mill test certificates, third-party SGS reports, and dimensional CAD files upon request.
| Product Category | Core Materials | Standards Compliance | Corrosion Rating | Cycle Endurance | Customization Scope |
|---|---|---|---|---|---|
| Hydraulic Cabinet Hinges | Cold-rolled steel / 201 SS / 304 SS | EN 15570 Level 3, ANSI/BHMA A156.9 | NSS 48H to 144H (Grade 9) | 80,000 to 100,000 cycles | Logo embossing, 3D cam screws, custom crank angles |
| Concealed Drawer Slides | Galvanized sheet, POM dampers | EN 15338 Level 3, BIFMA X5.5 | NSS 48H neutral spray | 60,000 to 80,000 cycles | Full extension, push-to-open, soft close, 10–24 inch |
| Heavy Duty Slides (76mm) | Cold rolled steel (2.5mm thickness) | Industrial heavy-load ISO standard | Zinc passivated, NSS 72H | 50,000 cycles at 225 kg | Lock-in/lock-out tabs, custom lengths to 60 inches |
| Slim Box Drawer Systems | Powder coated steel & tempered glass | European furniture safety standard | Abrasion resistant powder coat | 60,000 cycles at 40 kg | Grey, white, matte black, interior LED integrations |
| Furniture & Cam Locks | Die-cast zinc alloy, brass pins | ANSI A156.11 Grade 2 | Chrome, nickel, black electroplate | 30,000 key rotations | Master key systems, digital RFID, laser marked logos |
| Pantry Pull-Out Systems | Solid iron wire, carbon steel rail | DIN 68858 kitchen standards | Multi-layer nickel-chrome plating | 50,000 loaded extensions | Cabinet widths 150mm to 900mm, height adjustable |
Need Factory Quotations or Custom Engineering Samples?
Contact our overseas engineering desk at [email protected]. We provide CAD drawings, product specification sheets, and trial batch production schedules for your furniture projects.